Cloud Polar 3d
Jump to navigation
Jump to search
| Fab Lab | ||
|---|---|---|
| 3D Printing | 2D Cutting | Misc |
| Hive13 Equipment |
|---|
| List of All Documented Equipment |
|
| Owner/Loaner: Hive13 |
| Hive13 Asset Tag: None |
| Make/Model: Polar 3d (google) |
| Arrival Date: ?? |
| Does it work?: Yes |
| Certification Needed?: Yes |
| Contact: Fab Lab Warden |
| Floorplan: 1A |
|
Overview
Donated by Bill Steele. Please do not attempt to adjust any mechanical pieces on this machine!!
Uses 1.75mm PLA as a printing material. Other materials may have been tested. Ask around!
This Polar is similar to the original Polar, except that it connects via cloud.polar3d.com
The polar has problems with connecting to the internet sometimes if the power plug is pulled. The light up "Polar 3D" on the printer can help display it's current status. When the '3D' is White, it's connected to the cloud.
Work Log
- 1/25/16- Not working. The internal raspberry pi isn't booting. The SD card apparently became corrupt. Bill should be bring a replacement down this week.
- 1/26/16 Working. The sd card was fine, the raspberry pi was fried. The printer is now operational.