Delta 14" Bandsaw

Woodworking Shop

5' x 10' CNC Router Craftsman 24" scroll saw Delta 14" Bandsaw Delta 20" Band Saw - Wood Delta Wood Lathe Dewalt Biscuit Joiner Drill Doctor Drill Press, Floor Dust Collector Shop Fox Dust collector Grizzly Spindle Disc Sander Hitachi Finish Nailer NT 65MA4 Hitachi Frame Nailer NR 90AE(S1) Jet Air Filter Laguna JX8 Jointer Laguna PX20 Planer Lock Miter Milwaukee Sawzall Miter Saw, Dewalt 12" Sliding Compound DWS779 Miter Trimmer - Grizzly 1690 Omer Plastic Nail Gun Palm Nailer Bostich PN50 Porter Cable Random Orbital Sander Porter cable belt sander Powermatic 3520A Lathe Ridgid belt and spindle sander Router table Ryobi Circular Saw Ryobi Vibrating Palm Sander Sander, Buffalo 4"x36" Belt & 6" Disk SawStop PCS Table Saw Tool Shop Brad Nailer

Hive13 Equipment
List of All Documented Equipment
<flickr>5368891906
Owner/Loaner: Hive13
Hive13 Asset Tag: None
Make/Model: Delta 28-203 (google)
Arrival Date: 01/2011
Does it work?: yes
Certification Needed?: no
Contact: User:Jim
Floorplan: 1D

General Information

Band length is 93 1/2 inches.

Good blades to keep around: (taken from this thread: http://www.sawmillcreek.org/showthread.php?149862-Lets-talk-bandsaw-blades!) "There are a lot of different bandsaw blades and it is easy to feel like you need a different blade for every cut but I find you can do most of your cutting with 3-4 blades: 1. 1/2" 3 TPI Hook, if for a low HP 14" cast clone I would get a .022 gauge Woodslicer et al 2. 1/4" 6 TPI skip or hook 3. 1/8" 14 TPI standard 4. If you have a saw that can tension a bigger blade add a 4th blade, the biggest blade it will tension, hook, variable pitch in the range of 2-3TPI or 1.3-3 TPI (note the Lenox Woodmasters I mention below are NOT available in variable pitch smaller than 2" but they still do a great job in non-variable pitch)

For a cast clone I would get the 1/2" in a hardened spring steel as mentioned but the 1/4" in bimetal and the 1/8" in carbon. If you do a lot of resawing on a cast clone I would try a thin gauge 1/2" bimetal blade maybe a .025 4 TPI hook Lenox Diemaster 2.

For steel spined saws all the blades (except the 1/8") would be bimetal unless you want to spend the money on a carbide resaw blade.

Specific recomendations:

For smaller than 1/4" blades I like Starrett carbon

For 1/4"-1/2" general purpose I like the bimetal Lenox Diemaster 2

For 1/2-5/8" resaw blades I like the spring steel Kerfmaster, Woodslicer Bladerunner, again these are recommended for 14" cast clones

For 3/4" and up resaw blades I like four, the Lenox Woodmaster B (bimetal only in 1" and up), Lenox Woodmaster CT (carbide 1" and up), Lenox Trimaster (carbide 3/4" and up) and the Laguna Resaw King 3/4"-1 1/4". The Laguna has the benefit of being the only one that you can get resharpened. "

Also: (taken from this thread: http://www.reddit.com/r/woodworking/comments/23tljp/band_saw_blade_suggestions/ ) "Generally, most people like the Timberwolf series of blades; Olsen also makes good blades. Both are available at Woodcraft, and are often on sale. I have some of both and they each do a fine job. As for which size, typically you will want to run a 3/4 inch blades at 3 tpi, or a 2/3 tpi "skip raker" blade. Either will work, but resawing will challenge your saw and yourself - proper saw setup &tuning is a must, along with blade tension. Smaller blades for doing radius like for bandsaw boxes - get a 12 or 14 tpi blade, and then dress the back of it so you can turn the radius without the square edges digging in."

Gallery

How to use the floor model bandsaw