Electrical System - 2929 Historical

From Hive13 Wiki
Revision as of 13:31, 30 December 2014 by Reportingsjr (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

We have one. This will contain a drawing of where all of our outlets are, how the are wired together, what voltage and current they can handle, and what breaker they are connected to.

Needed Upgrades

  • Dirty room/metal room badly needs a minimum of one 120V 20A drop. Two would be even better.
  • Fab lab could do with another 120V 20A drop.
  • Ian Blais would like one near the CNC area for the popcorn machine. Could be useful for the CNCs as well.
  • Inspect load on main space light circuit and see if we can put two to four on it.
    • One more light in the woodworking area. (badly needed)
    • One more in the CNC area. (not as badly needed)
    • One more in the dirty room. (badly needed)
    • One more over meeting area. (not as badly needed)

Current layout

This is a very rough layout of where outlets are in the hive. The text is the circuit breaker panel (panel 1 or 2) followed by the breaker that the outlet is connected to. These locations are not exact and many outlets have not been traced yet (shown by a question mark). HIVE13.floor.plan.outlets.png

Breaker boxes

Take pictures of breaker box or just make a drawing of it?