Difference between revisions of "January 25, 2022"

From Hive13 Wiki
Jump to navigation Jump to search
(Minutes)
 
Line 13: Line 13:
  
 
<small>*COVID-19
 
<small>*COVID-19
 +
 
**In Person Events are Cancelled until this rising wave of COVID passes.
 
**In Person Events are Cancelled until this rising wave of COVID passes.
 
***Members may enter and use the space 24/7
 
***Members may enter and use the space 24/7
Line 23: Line 24:
 
****Respect Nature.
 
****Respect Nature.
 
****Respect Each Other.</small>
 
****Respect Each Other.</small>
 +
  
 
<small>*Building Updates
 
<small>*Building Updates
Line 32: Line 34:
 
*Paint Booth Status
 
*Paint Booth Status
 
**NO spraying VOCs indoors until we have ventilation
 
**NO spraying VOCs indoors until we have ventilation
 +
 
</small>
 
</small>
 
===Welcome Guests!===
 
===Welcome Guests!===
Line 43: Line 46:
  
 
'''*NOTE! ALL UPCOMING EVENTS ARE CURRENTLY CANCELLED TO BE RESCHEDULED WHEN IT IS DEEMED SAFE TO HAVE IN PERSON GATHERINGS. EVENTS ARE LISTED BELOW IN CASE OF CHANGE OF STATUS*'''
 
'''*NOTE! ALL UPCOMING EVENTS ARE CURRENTLY CANCELLED TO BE RESCHEDULED WHEN IT IS DEEMED SAFE TO HAVE IN PERSON GATHERINGS. EVENTS ARE LISTED BELOW IN CASE OF CHANGE OF STATUS*'''
 +
 
*January 29, 2022 - Enameling Orientation - Kevin Teaching
 
*January 29, 2022 - Enameling Orientation - Kevin Teaching
 
**'''Postponed'''
 
**'''Postponed'''
Line 49: Line 53:
  
 
===Kudos===
 
===Kudos===
 +
 
*Would like to incorporate this more - need more snappy name
 
*Would like to incorporate this more - need more snappy name
 
*KATE C has sorted out 2 totes of donated yarn. Organization is one of those things that take a lot of time but isn't very obvious and can be a thankless task, but not today! Thank you!!!
 
*KATE C has sorted out 2 totes of donated yarn. Organization is one of those things that take a lot of time but isn't very obvious and can be a thankless task, but not today! Thank you!!!
 
*KEVIN M has been working on programming for the kilns. This makes it so that the kilns are ready for whatever you need! Thanks Kevin! It's surely a long, drawn out process but is a huge improvement to the hot crafts area! Kevin also made us some much needed door signage!!
 
*KEVIN M has been working on programming for the kilns. This makes it so that the kilns are ready for whatever you need! Thanks Kevin! It's surely a long, drawn out process but is a huge improvement to the hot crafts area! Kevin also made us some much needed door signage!!
 
**'''Both''' kilns now have the USER programs '''PR01''' set to an appropriate cycle for loading and annealing Soft Glass and '''PR02''' set to the same for Boro glass
 
**'''Both''' kilns now have the USER programs '''PR01''' set to an appropriate cycle for loading and annealing Soft Glass and '''PR02''' set to the same for Boro glass
**'''The SC2 (smaller, blue) kiln''' has the Investment Casting Wax Burnout cycle programmed into '''PR03'''.
+
**'''The SC2 (smaller, blue) kiln''' has the Investment Casting Wax Burnout cycle programmed into '''PR03'''.
**'''The Heatmaster (Purple)''' kiln's controller has a built-in cycle for this purpose, which can be found in the '''"JWL"''' program group, by selecting the length of burnout you want and then entering the final temperature  
+
**'''The Heatmaster (Purple)''' kiln's controller has a built-in cycle for this purpose, which can be found in the '''"JWL"''' program group, by selecting the length of burnout you want and then entering the final temperature
 
**USER cycles on the kiln's wiki pages:
 
**USER cycles on the kiln's wiki pages:
 
***https://wiki.hive13.org/view/Hive13_Heatmaster_6000_Kiln
 
***https://wiki.hive13.org/view/Hive13_Heatmaster_6000_Kiln
 
***https://wiki.hive13.org/view/Paragon_SC-2_Silver_&_Glass_Kiln
 
***https://wiki.hive13.org/view/Paragon_SC-2_Silver_&_Glass_Kiln
 
*RALPH B - always puts in huge amount of effort to keeping the laser walk up ready, and being available to help out with any questions and guidance. You're amazing Ralph, and we really appreciate all you do.
 
*RALPH B - always puts in huge amount of effort to keeping the laser walk up ready, and being available to help out with any questions and guidance. You're amazing Ralph, and we really appreciate all you do.
*DAVE V & JOHN C were working hard on the paint booth this weekend. In true J&D fashion, they spent a huge amount of time on it. There's no doubting these two gents' dedication to the space.  
+
*DAVE V & JOHN C were working hard on the paint booth this weekend. In true J&D fashion, they spent a huge amount of time on it. There's no doubting these two gents' dedication to the space.
  
 
===Outreach Notes===
 
===Outreach Notes===
 +
 
*Honeycomb concept!
 
*Honeycomb concept!
 
*Meeting highlights - throw to Kostas
 
*Meeting highlights - throw to Kostas
Line 67: Line 73:
  
 
===New Pinned Posts on Slack===
 
===New Pinned Posts on Slack===
 +
 
*Philip T posted a really helpful post about his experience with the Sawstop and wanted to share some of its quirks. It's pinned in #woodworking
 
*Philip T posted a really helpful post about his experience with the Sawstop and wanted to share some of its quirks. It's pinned in #woodworking
 
*Kevin M made a helpful TL;DR about what the heck our voting process for member votes are! That's pinned in the #discussion channel
 
*Kevin M made a helpful TL;DR about what the heck our voting process for member votes are! That's pinned in the #discussion channel
  
 
===Notes===
 
===Notes===
 +
 
*Check out the new configuration of the metal shop!  
 
*Check out the new configuration of the metal shop!  
 
**So far - positive reception!
 
**So far - positive reception!
Line 76: Line 84:
  
 
===Votes===
 
===Votes===
 +
 
*Closing Tonight:
 
*Closing Tonight:
 
**[https://groups.google.com/g/cincihackerspace/c/yB1Awrw6D8M Button maker] - $418.30
 
**[https://groups.google.com/g/cincihackerspace/c/yB1Awrw6D8M Button maker] - $418.30
Line 82: Line 91:
 
**None
 
**None
 
*In Discussion for Future:
 
*In Discussion for Future:
** Welding Carts and Consumables Restock
+
**Welding Carts and Consumables Restock
*** Discussion in #welding, Amphay leading
+
***Discussion in #welding, Amphay leading
*** need carts w/ storgae for MIG and TIG
+
***need carts w/ storgae for MIG and TIG
 
****Cabinets $200-400 each
 
****Cabinets $200-400 each
*** We are essentially out of TIG consumables, need full restock, About $400-500
+
***We are essentially out of TIG consumables, need full restock, About $400-500
*** expect around $1000-1200 total vote
+
***expect around $1000-1200 total vote
*** Likely being posted in the next week
+
***Likely being posted in the next week
** Machine Shop Work Surfaces (w/ storage?)
+
**Machine Shop Work Surfaces (w/ storage?)
*** Discussion in #machining
+
***Discussion in #machining
*** Options are:
+
***Options are:
**** another big 4 x 8 table
+
****another big 4 x 8 table
***** pros: cheap and quick, already have proven design
+
*****pros: cheap and quick, already have proven design
***** cons: not as useful as a backtable when working at machines, no tool storage, would not help if two people were in shop at same time using different machines
+
*****cons: not as useful as a backtable when working at machines, no tool storage, would not help if two people were in shop at same time using different machines
***** would be around $200 total cost, have most materials on hand
+
*****would be around $200 total cost, have most materials on hand
**** mobile workbenches for tool storage and back tables at machines
+
****mobile workbenches for tool storage and back tables at machines
***** Cabinets $400 each, and would want one each for lathe, mills, roland, and metrology/layout tools, 4 total
+
*****Cabinets $400 each, and would want one each for lathe, mills, roland, and metrology/layout tools, 4 total
***** Pros: much better as back tables at machines, massive amounts of tool storage, can be moved around to suit work being done
+
*****Pros: much better as back tables at machines, massive amounts of tool storage, can be moved around to suit work being done
***** cons: quite expensive, won't have a single large continuous work surface
+
*****cons: quite expensive, won't have a single large continuous work surface
***** would be around $1600 total vote
+
*****would be around $1600 total vote
***** Hoping to post for vote in February
+
*****Hoping to post for vote in February
  
 
===Frisbee Round===
 
===Frisbee Round===
Line 109: Line 118:
  
 
==Minutes==
 
==Minutes==
start time
+
start time: 7:36pend time: 8:53pm
end time:  
 
  
===Votes===
+
- Warden meeting tomorrow at 8:00 PM through Google Meets
 +
 
 +
- owner of core clay (Laura) will be our February Tuesday Speakers
 +
 
 +
votes:
 +
 
 +
button maker - vote delayed
 +
 
 +
MRO budget renewal
 +
 
 +
- 1 no vote, but moves to make the MRO budget an indefinite budget or make warden budget
 +
 
 +
- 6 yes votes in groups
 +
 
 +
- 4 yes votes in meeting
 +
 
 +
- 1 abstain
 +
 
 +
vote passes
  
===Discussion:===
+
janfeb babies do card/game night next month (barring any drastic covid measures) please let lisa know what kind of cake is your fav, she will make.

Latest revision as of 22:05, 25 January 2022

Meetings
Previous Meeting: January 18, 2022 Meeting Procedure Next Meeting: February 1, 2022

Time and Place

Time: 7:30 PM
Place: Online only

To join the video meeting, click this link: https://meet.google.com/kmo-jxzu-auc
Otherwise, to join by phone, dial [513-760-6776|+1 513-760-6776] and enter this PIN: 863 676 973#
To view more phone numbers, click this link: https://tel.meet/kmo-jxzu-auc?hs=5

Weekly Meeting Agenda

Announcements

*COVID-19

    • In Person Events are Cancelled until this rising wave of COVID passes.
      • Members may enter and use the space 24/7
    • If you Feel Sick - Stay Home.
    • Wear a mask (Required for entry to Hive13)
      • We now have KN95 masks at the sign in desk. One per person per day, please.
      • Get vaccinated if you can
      • While you are at it, get a Flu shot!
        • Respect Science.
        • Respect Nature.
        • Respect Each Other.


*Building Updates

    • PLEASE respect the building alarm
    • We have 24 hour access to our space and the front stairwell ONLY, all other areas will trigger the alarm.
    • The alarm is active from 10pm to 6am
    • Do not go into any other part of the building during these times (ie; dumping the trash), as it will set off the alarm.
  • Paint Booth Status
    • NO spraying VOCs indoors until we have ventilation

Welcome Guests!

  • Introductions
  • What kind of things are you interested in doing/making?
  • How did you hear about us?
  • Tour After Meeting

Upcoming Events and Classes

*NOTE! ALL UPCOMING EVENTS ARE CURRENTLY CANCELLED TO BE RESCHEDULED WHEN IT IS DEEMED SAFE TO HAVE IN PERSON GATHERINGS. EVENTS ARE LISTED BELOW IN CASE OF CHANGE OF STATUS*

  • January 29, 2022 - Enameling Orientation - Kevin Teaching
    • Postponed
  • January 29, 2022 - Tech Committee Meeting - 1:30
    • Virtual

Kudos

  • Would like to incorporate this more - need more snappy name
  • KATE C has sorted out 2 totes of donated yarn. Organization is one of those things that take a lot of time but isn't very obvious and can be a thankless task, but not today! Thank you!!!
  • KEVIN M has been working on programming for the kilns. This makes it so that the kilns are ready for whatever you need! Thanks Kevin! It's surely a long, drawn out process but is a huge improvement to the hot crafts area! Kevin also made us some much needed door signage!!
    • Both kilns now have the USER programs PR01 set to an appropriate cycle for loading and annealing Soft Glass and PR02 set to the same for Boro glass
    • The SC2 (smaller, blue) kiln has the Investment Casting Wax Burnout cycle programmed into PR03.
    • The Heatmaster (Purple) kiln's controller has a built-in cycle for this purpose, which can be found in the "JWL" program group, by selecting the length of burnout you want and then entering the final temperature
    • USER cycles on the kiln's wiki pages:
  • RALPH B - always puts in huge amount of effort to keeping the laser walk up ready, and being available to help out with any questions and guidance. You're amazing Ralph, and we really appreciate all you do.
  • DAVE V & JOHN C were working hard on the paint booth this weekend. In true J&D fashion, they spent a huge amount of time on it. There's no doubting these two gents' dedication to the space.

Outreach Notes

  • Honeycomb concept!
  • Meeting highlights - throw to Kostas
  • Looking for Feb Tuesday speaker

New Pinned Posts on Slack

  • Philip T posted a really helpful post about his experience with the Sawstop and wanted to share some of its quirks. It's pinned in #woodworking
  • Kevin M made a helpful TL;DR about what the heck our voting process for member votes are! That's pinned in the #discussion channel

Notes

  • Check out the new configuration of the metal shop!
    • So far - positive reception!
  • Please don't put anything but glass in the glass trashcan. Because fire.

Votes

  • Closing Tonight:
  • Closing Next Week:
    • None
  • In Discussion for Future:
    • Welding Carts and Consumables Restock
      • Discussion in #welding, Amphay leading
      • need carts w/ storgae for MIG and TIG
        • Cabinets $200-400 each
      • We are essentially out of TIG consumables, need full restock, About $400-500
      • expect around $1000-1200 total vote
      • Likely being posted in the next week
    • Machine Shop Work Surfaces (w/ storage?)
      • Discussion in #machining
      • Options are:
        • another big 4 x 8 table
          • pros: cheap and quick, already have proven design
          • cons: not as useful as a backtable when working at machines, no tool storage, would not help if two people were in shop at same time using different machines
          • would be around $200 total cost, have most materials on hand
        • mobile workbenches for tool storage and back tables at machines
          • Cabinets $400 each, and would want one each for lathe, mills, roland, and metrology/layout tools, 4 total
          • Pros: much better as back tables at machines, massive amounts of tool storage, can be moved around to suit work being done
          • cons: quite expensive, won't have a single large continuous work surface
          • would be around $1600 total vote
          • Hoping to post for vote in February

Frisbee Round

  • What have you made?
  • See TV bulletin board

Minutes

start time: 7:36pend time: 8:53pm

- Warden meeting tomorrow at 8:00 PM through Google Meets

- owner of core clay (Laura) will be our February Tuesday Speakers

votes:

button maker - vote delayed

MRO budget renewal

- 1 no vote, but moves to make the MRO budget an indefinite budget or make warden budget

- 6 yes votes in groups

- 4 yes votes in meeting

- 1 abstain

vote passes

janfeb babies do card/game night next month (barring any drastic covid measures) please let lisa know what kind of cake is your fav, she will make.