Millermatic 211 Mig Welder: Difference between revisions
No edit summary |
No edit summary |
||
| Line 67: | Line 67: | ||
The welder itself is very low maintenance. (outside of tips, collets and consumables) According to Miller, the welder we have is an IGBT based design and is pretty much a hoss. It is also the series of welder that is their primary product line at this point. The main weakness that they mentioned was metal dust building up inside the case in "very harsh environments, like places with half an inch of aluminum dust on the floor." Regardless, they recommended opening the thing up and blowing it out with shop air once a year or so. If you happen to perform such maintenance, send a message to the google group or otherwise communicate with your fellow Hive members to let them know. | The welder itself is very low maintenance. (outside of tips, collets and consumables) According to Miller, the welder we have is an IGBT based design and is pretty much a hoss. It is also the series of welder that is their primary product line at this point. The main weakness that they mentioned was metal dust building up inside the case in "very harsh environments, like places with half an inch of aluminum dust on the floor." Regardless, they recommended opening the thing up and blowing it out with shop air once a year or so. If you happen to perform such maintenance, send a message to the google group or otherwise communicate with your fellow Hive members to let them know. | ||
{{Consumables}} | |||
Revision as of 14:11, 22 June 2019
| The Metalworking Shop Template Is No Longer Used |
|---|
| Hive13 Equipment |
|---|
| List of All Documented Equipment |
|
| Owner/Loaner: Hive13 |
| Hive13 Asset Tag: None |
| Make/Model: Millermatic 211 (google) |
| Arrival Date: 08/2013 |
| Does it work?: Yes |
| Certification Needed?: Yes |
| Contact: Metalworking Area Warden |
| Floorplan: 3D |
|
About the welder
The hive currently has a Millermatic 211 Auto-Set with MVP welder. It was purchased during the summer of 2013.
Users
The MIG Welder is only available to Hive13 members who have been certified on its use & care. To become certified, follow the steps below.
Only the following people are certified and permitted to use and certify you on the welder:
- Ian Wilson
- Jon Neal
- Chris Hodapp
- Mike Horwath
- Tiffany Bell-Horwath
- Dave B
- Nancy
- Dave Lear
- Jim Dallam
- Will Bauer
- Greg Arnold
- Ryan Hershey
Certification Process
Step 1) Watch these videos prior to requesting use of the welder:
- http://www.youtube.com/watch?v=M4bClzfu_Gg&feature=youtu.be
- http://www.youtube.com/watch?v=J7f0PG-cD0Q&feature=youtu.be
- http://www.youtube.com/watch?v=RmLX4Yl53UU&feature=youtu.be
- http://www.youtube.com/watch?v=rLRm14sTsoY&feature=youtu.be
- http://www.youtube.com/watch?v=gphgytmQtEk&feature=youtu.be
- http://www.youtube.com/watch?v=RBcCuYX9YAs&feature=youtu.be
- http://www.youtube.com/watch?v=kH9ayqDo0e4
2) Request hands on training from a person already certified
3) Hands on training
a) demonstrate competency to safely turn on and off welder (also attach tips/outlet plugs etc) b) demonstrate competency welding bar onto existing certification bars (both tack and finishing welds)
Safety Rules
- Do not use the welder if you have not had proper training.
- Never use the welder without a second person present to act as a fire watch.
- After using the welder, stay at the Hive for at least an hour to be sure that nothing is smoldering.
How to change the spool
Care and Feeding
The welder itself is very low maintenance. (outside of tips, collets and consumables) According to Miller, the welder we have is an IGBT based design and is pretty much a hoss. It is also the series of welder that is their primary product line at this point. The main weakness that they mentioned was metal dust building up inside the case in "very harsh environments, like places with half an inch of aluminum dust on the floor." Regardless, they recommended opening the thing up and blowing it out with shop air once a year or so. If you happen to perform such maintenance, send a message to the google group or otherwise communicate with your fellow Hive members to let them know.
Consumables
| Consumables page for Millermatic 211 Mig Welder |
|---|
- Gas
- 75/25% Argon/CO2
- Wire
- ER70S
- .035" (most common)
- .023"
- Stainless (not yet in inventory as of 6/22/19)
- .035
- ER70S