Difference between revisions of "Millermatic 211 Mig Welder"
Jump to navigation
Jump to search
m |
m |
||
Line 14: | Line 14: | ||
The hive currently has a [http://www.millerwelds.com/products/mig/product.php?model=M00245 Millermatic 211 Auto-Set with MVP] welder. It was purchased during the summer of 2013. | The hive currently has a [http://www.millerwelds.com/products/mig/product.php?model=M00245 Millermatic 211 Auto-Set with MVP] welder. It was purchased during the summer of 2013. | ||
+ | |||
+ | = Users = | ||
+ | The Laser is only available to Hive13 members who have been certified on its use & care. To become certified, follow the steps below. | ||
+ | |||
+ | Only the following people are certified and permitted to use and certify you on the welder: | ||
+ | |||
+ | * Ian Wilson | ||
+ | * Jon Neal | ||
+ | * Chris Hodapp | ||
+ | * Mike Horwath | ||
+ | * Tiffany Bell-Horwath | ||
+ | * Dave B | ||
+ | * Nancy | ||
+ | * Dave Leer | ||
+ | * Jim Dallam | ||
+ | |||
= Certification Process = | = Certification Process = |
Revision as of 17:59, 21 August 2014
Hive13 Equipment |
---|
List of All Documented Equipment
|
Owner/Loaner: Hive13 |
Hive13 Asset Tag: None |
Make/Model: Millermatic 211 (google) |
Arrival Date: 08/2013 |
Does it work?: Yes |
Certification Needed?: Yes |
Contact: User:Jon Neal |
Floorplan: 3D |
![]() |
Contents
About the welder
The hive currently has a Millermatic 211 Auto-Set with MVP welder. It was purchased during the summer of 2013.
Users
The Laser is only available to Hive13 members who have been certified on its use & care. To become certified, follow the steps below.
Only the following people are certified and permitted to use and certify you on the welder:
- Ian Wilson
- Jon Neal
- Chris Hodapp
- Mike Horwath
- Tiffany Bell-Horwath
- Dave B
- Nancy
- Dave Leer
- Jim Dallam
Certification Process
Step 1) Watch these videos prior to requesting use of the welder:
- http://www.youtube.com/watch?v=M4bClzfu_Gg&feature=youtu.be
- http://www.youtube.com/watch?v=J7f0PG-cD0Q&feature=youtu.be
- http://www.youtube.com/watch?v=RmLX4Yl53UU&feature=youtu.be
- http://www.youtube.com/watch?v=rLRm14sTsoY&feature=youtu.be
- http://www.youtube.com/watch?v=gphgytmQtEk&feature=youtu.be
- http://www.youtube.com/watch?v=RBcCuYX9YAs&feature=youtu.be
- http://www.youtube.com/watch?v=kH9ayqDo0e4
2) Request hands on training from a person already certified
3) Hands on training
a) demonstrate competency to safely turn on and off welder (also attach tips/outlet plugs etc) b) demonstrate competency welding bar onto existing certification bars (both tack and finishing welds)
Safety Rules
- Do not use the welder if you have not had proper training.
- Never use the welder without a second person present to act as a fire watch.
- After using the welder, stay at the Hive for at least an hour to be sure that nothing is smoldering.