Network

From Hive13 Wiki
Revision as of 21:27, 17 November 2009 by 216.68.32.10 (talk)
Jump to navigation Jump to search

Hive Network Infrastructure Installation

We're in the middle of putting in the permanent Hive13 network infrastructure. We will have jacks located in several areas outside the Office/Lab rooms, including along the Internet Bar, the Workbench, the Dirty Room, and eventually along the outside wall of the Office and the general workspace.

Current Status

  • The rack has been set up with one 96 port patch panel and two 24-port switches.
  • Wire runs have been installed to the key areas. The Internet Bar and the Workbench are ready to be terminated.

Work to be Done

  • Dress cables w/in rack ahead of termination and punching down.
  • Dress cables along shelf of Internet Bar ahead of termination and punching down.

Intended Jacks

  • 16 along the Internet Bar.
  • 4 on the support column next to the Workbench.
  • 10 along the outside wall of the Office.
  • 2 inside the Dirty Room.
  • 1 on the "Webcam Mount".

Hive Network Configuration

We're updating the Hive13 network configuration.

Current Status

  • The Westell modem has been connected directly to the Smoothwall firewall's external (red) interface via the patch panel. Port 69. Red cable.
  • The Smoothwall has an internal (green) interface. This connects the firewall to the LAN. Yellow cable in port #2.
  • The Linksys AP has been placed up on the wiring cabinet and connected, via one fo its switch ports, to the LAN. Yellow cable in switch port #1.
  • SSH access to server01 has been enabled via external port 2222

Work to be Done

  • Configure TFTP on server01
  • Install netboot images on server01
  • Install DBAN image
  • Install alternate *ubuntu images.
  • ???
  • profit