Small Laser Cutter: Difference between revisions

From Hive13 Wiki
Jump to navigation Jump to search
(Added link to service log in the "Current Status" section, along with adding the actual status of the laser)
Line 17: Line 17:

= Current Status =
= Current Status - <b>PARTIALLY WORKING ([[Laser_Service_Log|Service Log]])</b> =

as of 06/02/2011:
as of 06/02/2011:

Revision as of 19:05, 25 September 2013

Fab Lab
3D Printing 2D Cutting Misc

Hive13 Equipment
List of All Documented Equipment

Owner/Loaner: Hive13
Hive13 Asset Tag: None
Make/Model: Full Spectrum Engineering 60W CO2 Laser Cutter/Engraver (google)
Arrival Date: 06/2011
Does it work?: Partially
Certification Needed?: yes
Floorplan: 1A

WARNING: Do not look into laser with remaining eye. Pages to do with the Laser Cutter:



Current Status - PARTIALLY WORKING (Service Log)

as of 06/02/2011:

Laser arrived and installed. Test cuts made.

Certified with the laser? Want to get on the good side of the laser operators? See what you can possibly do to help on the Laser workstream on BetterMeans.

Paul is working on setting up a Laser Class.


The Laser is only available to Hive13 members who have been certified on its use & care. If you are not in this group, you may be able to do so on Fab Lab Mondays, but please get in touch ahead of time to prevent a wasted trip.

To become certified, you need to take the certification class. There will be a class August 13th. Contact us about scheduling one at other times.

Only the following people are certified and permitted to fire the lazzzor:

  • Chris Davis
  • Paul Vincent
  • Dave Menninger
    • Tiffany Vincent
    • Alicia Kravitz
    • Ian Wilson
    • John Stoughton
    • Brandon Wooldridge
  • Jon Neal
  • Chris Hodapp
  • Craig Smith
  • Kris Sandrick
  • Dave Myers
  • Ben Dakin



For details on the different settings required for different materials, see Laser Settings.

For sources of materials to cut and engrave, see Materials Resources.

General material limits:

  • Acrylic ¾” max
  • Wood ¾” max
  • Circuit Boards (theoretically, not tested yet)
    • Either - Apply coating, laser etch off coating, etch off exposed copper w/ acid.
  • Metal - Will not cut
    • Must apply chemical to "etch". Does not really etch, chemical only bonds to metal.
    • Can only do this to soft metal.
  • Paper / Cardboard
    • Yes


Pay by the Minute

  • $0.50 / minute for members, pay by the minute

Operator fee, pay by the hour

Details currently under discussion

Pay by the item

Operating the Laser Cutter

Scheduling time on the Laser

Please note: The Laser is only available to Hive13 members who have been certified on its use & care. If you are not in this group, you may be able to do so on Fab Lab Mondays, but please get in touch ahead of time to prevent a wasted trip.

  1. Open your Hive13 Calendar ( is a good start) and create an event.
  2. On the left hand side, select 'Add.. Rooms, etc.' and then 'Add 60W Laser Cutter'
  3. Select the 'Find a time' tab and navigate to the date and time you would like to use the laser, and make sure it is not shown as previously reserved on the calendar. You may schedule up to 2 hours at a time in advance. If no one else schedules time you can just continue using the machine - but we'd appreciate it if you would update your block later so we can keep track of usage.
  4. Save your event.


  1. Check for water flow on startup
  2. Make sure exhaust fan is running
  3. Check for fires and put them out ;)


  1. Ever leave the laser unattended (see fires above)
  2. Turn off the “Air” button. That needs to be on to protect the lens
  3. Laser on Vinyl, PVC, Sintra (will produce corrosive and toxic gases)
  4. Cut metals (it won't work)
  5. Bump or touch the mirrors or lenses (will put the machine out of alignment or damage optics)


LaserCut (Windows only)

  • This software will import files in these formats:
    • *.PLT (HPGL)
    • *.AI (Adobe Illustrator)
    • *.DXF (AutoCAD)
    • *.DST (Tajima)
    • *.CDR (Corel Draw)
    • *.BMP (Plain old bitmap, monochrome only) - and other common raster formats like PNG and GIF that will do monochrome
  • Manual (pdf)

Printer Driver (Windows only)

  • Currently in beta, does vector only; raster coming later
  • Can print from most windows programs
  • Outputs a *.PLT file in the C:\output directory, which can then be imported into LaserCut

For more design software, see Design Resources

Calibrating the Laser

  • TODO: Add info about aligning the laser and mirrors.
  • The small cylinder meant for focusing the laser on the workpiece is 25mm in height and 25mm in diameter. It is made out of aluminum.



Please see the Service Log for technicians responsible for service/maintenance of the laser cutter.


Optics Alignment