The Georgia Tech clock project
This blog follows one alumni's project to build a legacy pendulum clock as an inspiration for future generations of engineering students. The refrigerator-size transparent clock case is modeled on the form of Georgia Tech's "Tech Tower" administration building. The highly visible clockwork mechanism inside this case will have actions to gong on the hour and to chime the quarter-hour with phrases from the school's "Rambling Wrech" fight song.
The above images show the real Tech Tower and initial 2D and 3D modeling efforts. Note that the pendulum and the full height of the clock case are not yet included.
This is a first full height view of the intended clock. Compared to the prior images, the scale of the case is shrunk to 75% so the escape wheel pallets are centered in the arch window behind the TECH lettering. The clock dial is at 64" up from the floor. The peak of the roof is at 108" (9-feet). Note this view shows using the image of the GT seal on the swinging pendulum bob.
Only the regulator gear train is currently shown. The other two similar gear trains for the chime and gong actions remain to be shown. They will each be turned 90 degrees to be featured prominently when the clock is viewed from the left and right sides.
1st Qtr = "I'm a rambling wreck"
2nd Qtr = "I'm a rambling wreck from Ga. Tech"
3rd Qtr = "I'm a rambling wreck from Ga. Tech and a hell of an engineer"
4th Qtr = "Rambling, gambling hell of an engineer" GONG, GONG, GONG, ...
YouTube link to an animation http://www.youtube.com/watch?v=5fhZmld2q0A&feature=youtu.be
Early investigations into the chiming and gonging linkages