User:Brent Shields: Difference between revisions

From Hive13 Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:
**Motor sizing.
**Motor sizing.
**PLC programming, project management, industrial network design and startup, servo system application and programming using resolver feedback.
**PLC programming, project management, industrial network design and startup, servo system application and programming using resolver feedback.
*Embedded programming at Steel mill startup.  
*Embedded programming at Steel mill startup. iRMX real time os to control mill stands hydraulics.
**Hydraulic and pneumatic automation troubleshooting, cutting torch, rolling mill operator, reheat furnace lighter upper, Seimens PLC troubleshooting for roll change and conveyor systems.
**Operated 135 ton crane, trained in basic heavy rigging, deck crane, manlift, confined space entry, cpr, fire response.
*Controls engineer and project engineer at Allen-Bradley.
*Controls engineer and project engineer at Allen-Bradley.
**Motion control programming and system application.
**Motion control programming and system application.
**Automation system application, proposal, project management, programming, design and startup.
**Automation system application, proposal, project management, programming, design and startup.
*Currently using Perl when possible to automate stuff as possible for large SCADA project for Duke Energy.
**Industrial networks, PLCs, RFID systems, optical encoders and resolvers for motion control.
*Currently using Perl when possible to automate as much as possible for a large SCADA project at Duke Energy. FTPs, Archive::Zip, XML::LibXML, etc.

Revision as of 11:18, 4 February 2012

  • Soldering, building circuits (and burning holes in things) since age 9 or so.
  • Made homemade guitar effects in teen years.
  • Competed in Regional Robotics competition in Miami during college.
  • Did mechanical design at automation R&D facility for P&G.
    • Switched them over from big expensive and static test stands to erector set style where the servo motors and unit ops could be moved around on the machine.
    • Motor sizing.
    • PLC programming, project management, industrial network design and startup, servo system application and programming using resolver feedback.
  • Embedded programming at Steel mill startup. iRMX real time os to control mill stands hydraulics.
    • Hydraulic and pneumatic automation troubleshooting, cutting torch, rolling mill operator, reheat furnace lighter upper, Seimens PLC troubleshooting for roll change and conveyor systems.
    • Operated 135 ton crane, trained in basic heavy rigging, deck crane, manlift, confined space entry, cpr, fire response.
  • Controls engineer and project engineer at Allen-Bradley.
    • Motion control programming and system application.
    • Automation system application, proposal, project management, programming, design and startup.
    • Industrial networks, PLCs, RFID systems, optical encoders and resolvers for motion control.
  • Currently using Perl when possible to automate as much as possible for a large SCADA project at Duke Energy. FTPs, Archive::Zip, XML::LibXML, etc.