User:Paul: Difference between revisions

From Hive13 Wiki
Jump to navigation Jump to search
No edit summary
Line 8: Line 8:
* [[Kiosk Computer Setup]]
* [[Kiosk Computer Setup]]
* [[Modified RC Vehicle]]
* [[Modified RC Vehicle]]
* [[TestProject]]

== Personal Projects ==
== Personal Projects ==

Revision as of 10:38, 21 August 2009

About Me

I am 22 years old and current at the end of my 4th year as a CS student at UC. I enjoy programming, working on computers (both software and hardware), modding hardware, and I am just getting started teaching myself about micro controllers.

The aspect of programming that I enjoy the most is the process of learning how to write some new piece of code. One of my latest projects was building a digital thermometer out of an Arduino and then writing a program on my computer that could communicate with it over a Comm port. While it was a fairly simple project the fun part was learning how to do it, and less about polishing it up (the digital thermometer uses a cheap thermistor that is fairly inaccurate I have discovered).

Hive13 Projects

Personal Projects

As I said in the above, what I like the most about the projects I work on is the learning process involved with them. Each of the following projects had some aspect that I had not done before or had tried before but was not happy with the result so I was trying again.

Mouse LED Swap

This was one of my first hardware projects, and it was fairly easy and I think the outcome was pretty cool looking.


Workbench PSU

I really like to work on computers, whether it be assembling them, salvaging parts, fixing a system or just playing video games. However, one annoyance that I continually ran into was the fact that I would have something like a fan or a hard drive that I was not sure worked, or I just wanted to test but I would have no easily accessible computer to test it in. Also, through my various hardware modding I wanted something I could plug into a breadboard to have an easy supply of 3.4v, 5v, or 12v. So when through my computer salvaging I ended up with an extra computer PSU I decided to turn it into a workbench PSU.

Here is an older picture of the PSU shortly after I had finished it:


WorkbenchPSU switch.jpg

A couple weeks after this picture the wireing board developed a short and i decided that it might not be the smartest thing to use an aluminum sheet of metal for the connector board. So I cut out and etched a plexiglass board that labels the voltages of each of the connector points, unfortunately I have yet to take a picture of it since I updated it.

48 Port Switch Mod

My cousin and I occasionally organize LAN parties, however when your group gets past 3-4 people, hooking everyone into the network becomes a nightmare of switches and routers daisy chained together. So we started looking for a 24 or 48 port switch on ebay. Tom found this a beautiful 48 port enterprise switch for $60 (including shipping). It had some problems, it had clearly been dropped at some point, the fan grills were bent in to the point that one of the fans had broken, and for some reason it was only running at 10 mb/s instead of 10/100 mb/s. Tom was able to get a hold of the companies tech support who walked him through flashing the firmware, which fixed the speed issue. Then we turned to the physical parts of the switch and decided it would be much more fun to personalize the switch. After dismantling it and fixing the fan grills, we sandblasted the old paint off. I then took it home and cut the window out of the top with a dremel, then primed and painted it. After that was finished Tom came over and set up the LED lighting for the case.

Unfortunately through various website moves I have lost the pictures that showed the work in progress, but I found a couple pictures from one of our last LAN parties: