Difference between revisions of "Wishlist"

From Hive13 Wiki
Jump to navigation Jump to search
(Safety)
 
(77 intermediate revisions by 16 users not shown)
Line 1: Line 1:
{{TODO}}
+
This is stuff we would like to have in our space. If you want to donate a tool see [[Donations]]. Monetary contributions however big or small are also very welcome! If you want to donate towards a tool/want to start a fundraiser for one please contact our COO. Note that un-reimbursed expenses spent on behalf of Hive13 and its non-profit mission should be tax-deductible. If you spend more than $250 on an item you may need a letter from the Hive (details needed)
  
This is stuff we would like to have in our space. If you want to donate a tool see [[Donations]]. Monetary contributions however big or small are also very welcome! If you want to donate towards a tool/want to start a fundraiser for one please contact our COO.
+
==Kitchen==
  
= Kitchen =
+
*24 complete matching place settings
* Sous-Vide
+
*Sous-Vide
 +
*Instapot
 +
*Better toaster oven with convection
 +
*Improved Blender/Food processor
 +
*Rocks glasses
 +
*Anti-fatigue mats
 +
*Baking spatulas
 +
*New pot holders / oven mitts (This would make a great sewing class collaboration!)
 +
*Metal spatulas (Various sizes, slotted/solid, etc)
 +
*Pasta spoon
 +
*Soup sized bowl set
 +
*Under sink organizer
 +
*Tupperware set
 +
*Large drying mat
 +
*Mortar and Pestle
 +
*Better spice storage
 +
*Soup/Cereal sized bowl set
 +
*Candy dispenser (may work for kitchen or lounge?)
 +
*Spoon rest
  
= Electronics =
+
==Electronics==
=== Components ===
+
===Components===
* Nice way to store components.
 
* What should we keep on hand? The red vending machine needs to be stocked soon!
 
* Assorted electronic components (Pots, diodes, you name it)
 
* Crimp on wire connectors
 
* Capacitor kit
 
* Heat shrink tubing
 
* SMD component book
 
* breadboards
 
* 22 Gauge wire
 
** Radioshack has 100' spools for $8.50
 
  
=== Electronic Tools ===
+
*Nice way to store components.
* Multimeters
+
*Assorted electronic components (Pots, diodes, you name it)
** Bench meters with 4 wire sensing would be nice
+
*Crimp on wire connectors
* Bench power supplies
 
** We have a pretty nice one on loan from Tye. Dual output 30V, not sure how much current.
 
** Maybe get some of the E36XX series supplies. Really robust, can be had pretty cheap (I got a 20V, 3A, single supply one for $60 shipped), and fairly low profile.
 
* Signal generator (again, digital would be awesome)
 
** Dave B has an older wavetek sig gen on loan to us. Not super accurate, but it works!
 
* Laser Thermometer
 
  
= Wood Working =
+
===Electronic Tools===
=== Tools ===
 
* Jigsaw
 
* Scroll saw
 
* Nicer Miter saw
 
* Powermatic planer
 
** Model no 1791213
 
* Circular saw
 
* F clamps
 
** Jorgensen 37xx series
 
* Parallel clamps
 
** jorgensen 80xx series
 
* Pipe clamps
 
* Wood lathe
 
* Saw horses.  Preferably fold-able.
 
* Coping saw blades
 
* Sandpaper
 
  
=== Safety ===
+
*Good Fume Extraction
* Air cleaners to catch all of the small dust from sanding, bandsaw, etc that goes in the air.
+
**Filtered system with decent airflow. DIY or otherwise.
 +
*Laser Thermometer
 +
*rubidium/other atomic frequency standard
  
= Metal Working =
+
===Dream===
* Knowledge on how to do metal working
 
* Materials /always/ welcome
 
* File set
 
* oxy/acetylene torch
 
* larger Metal lathe (possibility to do threads would be nice)
 
* Anvil
 
* tap and die set (this would be amazingly useful)
 
* [[Electric_Shop_Furnace|Metal furnace or forge]] setup
 
* Greensand casting bins
 
* Loctite (both blue 242 and red 271)
 
* We don't have much metal working stuff down here besides large, well known items. If you have some metal working tools to donate and don't know if we already have some of the stuff here... we probably don't. If you have done metal working please suggest items we may need!
 
* Pipe Bender
 
* Metal Brake
 
* Pneumatic tools
 
** We have a cut off wheel and a cheap die grinder, plus some random attachments like a tire stem adapter and some random nozzles
 
* Transfer punch set
 
* Maybe:
 
** Pressure washer
 
** Hot-wire cutter
 
=== Milling Machine ===
 
* End mills
 
* R8 collet tools
 
* Hold down clamps (what type? Strap, etc)
 
* V blocks
 
* Parallels set
 
* Offset boring head & boring bars
 
  
=== Safety ===
+
*Keithley 7510
* Face shield
+
*Keithley 2460
 +
*Agilent/Keysight DSOX4024A
 +
*Agilent/Keysight signal gen
 +
*Pick and place machine - Possible add-on to a Delta Printer/Robot
  
= Fab Lab =
+
==CNC Router==
* Add things here please!
+
===CPU Enclosure===
  
= Other Work Areas =
+
*Build enclosure for CNC Control and PC
=== Art ===
+
*Support the keyboard, mouse and monitor.
* We have very little art stuff! Anything accepted!
+
*Provide storage for collets and bits
 +
*Include cooling fans and air filters
 +
*Mount on casters
  
=== Random ===
+
==Wood Working==
* Vacuum forming table
+
===Tools===
* 4-color Screen-printing rig
 
* Lift
 
* fume hood
 
* autoclave
 
* large digital scale (200lbs+, maybe .1lbs resolution?)
 
* temperature controlled hot plate (digital or analog fine)
 
* sla or dlp 3d printer
 
  
= Computers =
+
*Separate Wood working tools from metal working tools.
* We are always looking to upgrade our computers! Specs we are looking for:
+
*Store wood working blades and accessories at the machine, in appropriate storage cabinet.
** Dual-core CPU or nicer
+
*Powermatic planer
** 2 GB+ of DDR2 800 or nicer
+
**Model no 1791213
* Hard drives larger than 500 GB
+
*Nicer circular saw
* Some server hardware, stop by a meeting or talk to us on IRC to see if we need what you have.
+
*Router Table with work area
* We will however take old computers and dispose of them for you. (No ancient laptops, no CRTs. Towers and servers only)
+
*Work bench with level feeds for Saws
 +
*Feed support and feed space for Joiner, Planer, Router
 +
*CLAMPS (ALL OF THEM)
 +
**More F clamps
 +
***Jorgensen 37xx series
 +
**Parallel clamps
 +
***jorgensen 80xx series
 +
*Saw horses.  Preferably fold-able.
 +
*Magnetic feather boards
 +
*Knife maker's sander
 +
*Board Buddies (or the like)
 +
*Wide selection of hand planes
 +
*Chisel sharpening tools
 +
*GRR-Ripper push block
 +
*Splitter w/o blade guard
 +
*Panel Saw
 +
*Mortiser
  
= Office =
+
===Safety===
* Nothing
 
  
= Storage =
+
*Move Vertical Storage to improve working space and access to materials
* Several tool chests!! We are drastically in need of storage for our tools as we have outgrown our pegboards.
+
*Air cleaners to catch all of the small dust from sanding, bandsaw, etc that goes in the air. (we have one, but better mounting would be good and more would also be good)
 +
*Storage Space for Projects Underway.
  
= [[Lounge]] =
+
==Metal Working==
* Nicer couches for the lounge
 
* Decent Media PC
 
* Full HD Projector
 
** Chromecast/Miracast?
 
  
= General Space Wants and Needs =
+
*Ring roller / roll bender - capable of rolling square and round tubing
 +
*Water-Jet cutting (dream on)
 +
*Cutting:
 +
**Vertical bandsaw. Sometimes you need to do more sophisticated things than cut stuff in half...
 +
**Blade Welder for Band Saw(s) Buy bulk blades and weld them on demand. (much lower cost)
  
=== Relaxation ===
+
*Anvil
* Games (board or digital)
+
*Plasma Cutter CNC
 +
*[[Electric_Shop_Furnace|Metal furnace or forge]] setup
 +
**Greensand casting bins
  
=== Decorations ===
+
'''Milling Machine,Tools/Fixtures'''
* Posters
 
* Plants would be nice to keep the air a bit cleaner and liven up the space a bit
 
  
[[Category:Meatspacers]]
+
*R8 collets larger than 3/4 inch (complete our set)
 +
*V blocks
 +
*Offset boring head & boring bars
 +
*Sine bar
 +
*Gauge block set - Cylindrical square
 +
*Rotary table 6 to 10 inch - Indexing / dividing head
 +
*Nice screw length drill bit set
 +
*Cover for Lathe and Mill to keep off sawdust
 +
 
 +
===Sheet Metal Tools===
 +
 
 +
*Metal Box / Pan Brake - Moveable Fingers 12 Ga capable Manual [https://www.ebay.com/itm/BAILEIGH-Sheet-Metal-Brake-HB-4816/152334824407?_trksid=p2485497.m4902.l9144 $2500] to [https://www.ebay.com/itm/BPF-1240-40-x-12-Gauge-Box-Pan-Brake-With-Foot-Clamp/151058470818?_trksid=p2485497.m4902.l9144 $3500]
 +
*Metal Shear, Manual Stomp 12 Ga capable [https://www.ebay.com/itm/TENNSMITH-T5216-STOMP-SHEAR/362450441565?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20131231084308%26meid%3Dff58353ea3644bc4b5e816e0beabf5c4%26pid%3D100010%26rk%3D1%26rkt%3D7%26sd%3D253880665467%26itm%3D362450441565&_trksid=p2047675.c100010.m2109 $2000] to $[https://www.ebay.com/itm/Wysong-1252-Mechanical-Shear-52-of-12ga-Mild-Steel-Capacity/153097933363?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20131231084308%26meid%3Dff58353ea3644bc4b5e816e0beabf5c4%26pid%3D100010%26rk%3D5%26rkt%3D7%26sd%3D25 5000]
 +
*Spot welder
 +
 
 +
===Welding Accessories===
 +
 
 +
*Spool gun (http://store.cyberweld.com/misp150sp30.html)
 +
 
 +
===Misc Tools===
 +
 
 +
*Tubing Bender / roller with Dies
 +
*Tube Notching Jig and Metal Cutting Hole Saws for up to 2 inch tubing
 +
*Paint Booth Ventilation and Doors
 +
*Maybe:
 +
**Pressure washer
 +
**Hot-wire cutter ( Could run off plastic bender power supply )
 +
 
 +
===Safety===
 +
 
 +
*Better ventilation for welding
 +
 
 +
==Fab Lab==
 +
 
 +
*SHAPEOKO workspace, enclosure for dust control. (does this belong with woodworking exhaust?)
 +
*Resin 3d printer
 +
*Powder 3d printer
 +
*Dual extrusion FFF printer
 +
*Smoothing stuff (acetone chamber?)
 +
**New possibility coming out soon: PolySher from Polymaker
 +
*Simplify3D software
 +
*Large filament dehydrator
 +
*Filament "library" with many types for members to try out
 +
*hand-held 3d scanner for large objects (Cubify Sense?)
 +
*Storage space for flat materials
 +
*Resin Casting Workspace - Vacuum Pot, Level Table, Exhaust Fan - (potentially in paint area)
 +
 
 +
<br />
 +
 
 +
== Sewing and Craft Area ==
 +
 
 +
=== Sewing ===
 +
 
 +
* Large cutting table
 +
* Male dress form
 +
* Embroidery Machine and collection of thread
 +
* Upholstery - including staple gun
 +
* Pattern drafting software
 +
 
 +
Please check with the Sewing Warden before donating sewing supplies as there is a limited amount of space
 +
 
 +
=== Craft Area ===
 +
 
 +
* Work table along window wall of front space with spinning stools
 +
* Drying rack
 +
* Paint brushes both bristle and foam
 +
 
 +
*Digital drawing pad (USB input device, vs tablet-style?)
 +
 
 +
 
 +
==Other Work Areas==
 +
'''CAD Stations'''
 +
 
 +
===Random===
 +
 
 +
*4-color Screen-printing rig
 +
*Lift
 +
*fume hood
 +
*autoclave
 +
*large digital scale (200lbs+, maybe .1lbs resolution?)
 +
*temperature controlled hot plate (digital or analog fine)
 +
*Lighted box/booth for taking pics of projects (Shotbox? Limostudio? make one?)
 +
*Large trash cans to spread around the new larger space
 +
 
 +
===Computers===
 +
 
 +
*Build Filter HEPA housing and positive airflow fans for Server Rack Either install on back of Rack or build separate housing.
 +
*We are always looking to upgrade our computers! Specs we are looking for:
 +
**i3 or better
 +
**4 GB+ of RAM
 +
*Hard drives larger than 1 TB or SSDs bigger than 128GB
 +
*Leap gesture controller (very cool but not very useful)
 +
 
 +
==Office==
 +
*Desk to store the "official" paperwork. Maybe an old rolltop?
 +
 
 +
==Storage==
 +
 
 +
*Swinging pegboard storage for workbench area
 +
*More Large Flat storage
 +
 
 +
==[[Lounge]]==
 +
 
 +
*Decent Media PC
 +
*Chromecast/Miracast?
 +
 
 +
==General Space Wants and Needs==
 +
 
 +
===Relaxation===
 +
 
 +
===Decorations===
 +
 
 +
*Posters
 +
*Plants would be nice to keep the air a bit cleaner and liven up the space a bit

Latest revision as of 15:10, 2 July 2021

This is stuff we would like to have in our space. If you want to donate a tool see Donations. Monetary contributions however big or small are also very welcome! If you want to donate towards a tool/want to start a fundraiser for one please contact our COO. Note that un-reimbursed expenses spent on behalf of Hive13 and its non-profit mission should be tax-deductible. If you spend more than $250 on an item you may need a letter from the Hive (details needed)

Kitchen

  • 24 complete matching place settings
  • Sous-Vide
  • Instapot
  • Better toaster oven with convection
  • Improved Blender/Food processor
  • Rocks glasses
  • Anti-fatigue mats
  • Baking spatulas
  • New pot holders / oven mitts (This would make a great sewing class collaboration!)
  • Metal spatulas (Various sizes, slotted/solid, etc)
  • Pasta spoon
  • Soup sized bowl set
  • Under sink organizer
  • Tupperware set
  • Large drying mat
  • Mortar and Pestle
  • Better spice storage
  • Soup/Cereal sized bowl set
  • Candy dispenser (may work for kitchen or lounge?)
  • Spoon rest

Electronics

Components

  • Nice way to store components.
  • Assorted electronic components (Pots, diodes, you name it)
  • Crimp on wire connectors

Electronic Tools

  • Good Fume Extraction
    • Filtered system with decent airflow. DIY or otherwise.
  • Laser Thermometer
  • rubidium/other atomic frequency standard

Dream

  • Keithley 7510
  • Keithley 2460
  • Agilent/Keysight DSOX4024A
  • Agilent/Keysight signal gen
  • Pick and place machine - Possible add-on to a Delta Printer/Robot

CNC Router

CPU Enclosure

  • Build enclosure for CNC Control and PC
  • Support the keyboard, mouse and monitor.
  • Provide storage for collets and bits
  • Include cooling fans and air filters
  • Mount on casters

Wood Working

Tools

  • Separate Wood working tools from metal working tools.
  • Store wood working blades and accessories at the machine, in appropriate storage cabinet.
  • Powermatic planer
    • Model no 1791213
  • Nicer circular saw
  • Router Table with work area
  • Work bench with level feeds for Saws
  • Feed support and feed space for Joiner, Planer, Router
  • CLAMPS (ALL OF THEM)
    • More F clamps
      • Jorgensen 37xx series
    • Parallel clamps
      • jorgensen 80xx series
  • Saw horses. Preferably fold-able.
  • Magnetic feather boards
  • Knife maker's sander
  • Board Buddies (or the like)
  • Wide selection of hand planes
  • Chisel sharpening tools
  • GRR-Ripper push block
  • Splitter w/o blade guard
  • Panel Saw
  • Mortiser

Safety

  • Move Vertical Storage to improve working space and access to materials
  • Air cleaners to catch all of the small dust from sanding, bandsaw, etc that goes in the air. (we have one, but better mounting would be good and more would also be good)
  • Storage Space for Projects Underway.

Metal Working

  • Ring roller / roll bender - capable of rolling square and round tubing
  • Water-Jet cutting (dream on)
  • Cutting:
    • Vertical bandsaw. Sometimes you need to do more sophisticated things than cut stuff in half...
    • Blade Welder for Band Saw(s) Buy bulk blades and weld them on demand. (much lower cost)

Milling Machine,Tools/Fixtures

  • R8 collets larger than 3/4 inch (complete our set)
  • V blocks
  • Offset boring head & boring bars
  • Sine bar
  • Gauge block set - Cylindrical square
  • Rotary table 6 to 10 inch - Indexing / dividing head
  • Nice screw length drill bit set
  • Cover for Lathe and Mill to keep off sawdust

Sheet Metal Tools

  • Metal Box / Pan Brake - Moveable Fingers 12 Ga capable Manual $2500 to $3500
  • Metal Shear, Manual Stomp 12 Ga capable $2000 to $5000
  • Spot welder

Welding Accessories

Misc Tools

  • Tubing Bender / roller with Dies
  • Tube Notching Jig and Metal Cutting Hole Saws for up to 2 inch tubing
  • Paint Booth Ventilation and Doors
  • Maybe:
    • Pressure washer
    • Hot-wire cutter ( Could run off plastic bender power supply )

Safety

  • Better ventilation for welding

Fab Lab

  • SHAPEOKO workspace, enclosure for dust control. (does this belong with woodworking exhaust?)
  • Resin 3d printer
  • Powder 3d printer
  • Dual extrusion FFF printer
  • Smoothing stuff (acetone chamber?)
    • New possibility coming out soon: PolySher from Polymaker
  • Simplify3D software
  • Large filament dehydrator
  • Filament "library" with many types for members to try out
  • hand-held 3d scanner for large objects (Cubify Sense?)
  • Storage space for flat materials
  • Resin Casting Workspace - Vacuum Pot, Level Table, Exhaust Fan - (potentially in paint area)


Sewing and Craft Area

Sewing

  • Large cutting table
  • Male dress form
  • Embroidery Machine and collection of thread
  • Upholstery - including staple gun
  • Pattern drafting software

Please check with the Sewing Warden before donating sewing supplies as there is a limited amount of space

Craft Area

  • Work table along window wall of front space with spinning stools
  • Drying rack
  • Paint brushes both bristle and foam
  • Digital drawing pad (USB input device, vs tablet-style?)


Other Work Areas

CAD Stations

Random

  • 4-color Screen-printing rig
  • Lift
  • fume hood
  • autoclave
  • large digital scale (200lbs+, maybe .1lbs resolution?)
  • temperature controlled hot plate (digital or analog fine)
  • Lighted box/booth for taking pics of projects (Shotbox? Limostudio? make one?)
  • Large trash cans to spread around the new larger space

Computers

  • Build Filter HEPA housing and positive airflow fans for Server Rack Either install on back of Rack or build separate housing.
  • We are always looking to upgrade our computers! Specs we are looking for:
    • i3 or better
    • 4 GB+ of RAM
  • Hard drives larger than 1 TB or SSDs bigger than 128GB
  • Leap gesture controller (very cool but not very useful)

Office

  • Desk to store the "official" paperwork. Maybe an old rolltop?

Storage

  • Swinging pegboard storage for workbench area
  • More Large Flat storage

Lounge

  • Decent Media PC
  • Chromecast/Miracast?

General Space Wants and Needs

Relaxation

Decorations

  • Posters
  • Plants would be nice to keep the air a bit cleaner and liven up the space a bit