|No Longer Hive13 Equipment|
|List of All Documented Equipment|
|Hive13 Asset Tag: None|
|Make/Model: Robert Larson 540-2000 (google)|
|Arrival Date: 12/2014|
|Does it work?: Yes|
|Certification Needed?: No|
|Contact: User:Elly Hall|
- Blade Length: 6-3/4"
- Teeth (Coverage on Blade): 5-1/4"
- Blade Type: Pinned
- Cutting Depth: 5"
Twist handle to loosen or tighten tension on blade.
To change cutting angle, loosen blade and twist pins to desired angle, then retighten handle.
To change blades, loosen handle almost all the way, and hold the saw vertically on the table with the handle up (perpendicular to the table) and the top of the frame on the table. Gently lean on the handle (pushing both sides of saw frame together) to relieve final tension on blade. You should be able to remove the blade with your free hand, and replace with new blade while the tension is relieved. Tighten handle to finish.