January 3, 2017

From Hive13 Wiki
Jump to: navigation, search
Meetings
Previous Meeting: December 27, 2016 Meeting Procedure Next Meeting: January 10, 2017

Coordinates

Time: 7:30 PM

Space: Anchor Building, 2929 Spring Grove Ave.

Agenda

Housekeeping

  • Noise Curfew - Quiet hours are 10:30pm to 7am until further notice.
  • Liability waivers must be legible

Old Business

  • CNC Classes Continue
    • Thursday and Friday, January 5 and 6 from 6pm to 8:30pm
    • Saturday January 21 from 10am to 4pm (with a break in there for lunch).
  • CNC Dust Collection
    • We need to make emptying the filter part of CNC operation
    • Can we add a manometer to the collector so we can see if it’s working?

New Business

  • What to do with our new space?
    • Write down some suggestions today, have some discussions in the next few weeks, vote in a short term experiment (maybe 3 months), then at that later time reevaluate and re-vote for a semi-permanent use.
    • This worked well for the warden's program, a trial and then a more permanent vote with slight changes as things were done in practice.
    • Keep in mind: It would be pretty useful to leave the vote a bit flexible and open ended.

Votes

  • Vote to improve dust collection system - up to $1000 (target $500)
    • Vote next week, proposed on Thursday so not 7 days notice (being fair to everyone here.)
  • Proposal for Edge Technology Pro Tram System
    • Next week - Vote on 1/10/17
  • Vote to get a bench multimeter and probes - Up to $220
  • Vote to overturn previous affirmative vote to remove CNC storage
    • Non-specific, general vote


Minutes

Old Business

  • CNC Classes will occur Thursday and Friday, January 5 and 6 from 6pm to 8:30pm, and Saturday January 21 from 10am to 4pm.
  • Discussions about the CNC dust collection continue.
    • Please empty the filter after using the CNC

New Business

  • We are soliciting suggestions for the new space.
    • Limitations - This will need to be a relatively quiet area. Nothing can be stored in the hall. It rains in the room a bit.
    • Paint Booth?
    • Move the meeting area or lounge?
    • Hive IT? Could we move the servers in there.
    • Moving the fab lab into the new space?
    • Additional personal storage as a perk of cornerstone membership?
    • Can we add another door?
    • Could we move the electronics and IT stuff in there?
  • Please clean out the Gray and Green metal lockers by Saturday. They are leaving the hive.
  • We seem to have lost some of our medium quick clamps.
  • Next week, there will be a vote for a tramming apparatus

Votes

  • Vote to get a bench multimeter and probes - Up to $220
    • In person votes. (13)
    • 2 - Abstain
    • 1 - No
    • 10 - Yes
  • Online Votes
    • 10 - Yes
      • Motion Passes.
  • Vote to overturn previous affirmative vote to remove CNC storage
    • Discussion
      • Non-specific, general vote
      • This would impact use of space next door, and current space for at least a few months until we gain access to space
      • This also sets in stone a use for the space before brainstorming and discussion begins
      • This has been postponed until we can further define the vote.
  • Vote to improve dust collection system - up to $1000 (target $500)
    • Vote next week, proposed on Thursday so not 7 days notice (being fair to everyone here.)
  • Proposal for Edge Technology Pro Tram System
    • Next week - Vote on 1/10/17


Round Tuit Round

  • Greg - spent 22 quality hours taking down Christmas lights.
  • Ryan - Relaxing. Supbponeaed. These things do seem to conflict.
  • Andrew - Has been improving on the wood shop.
  • Clay - Recent promotion. Adulting around the house.
  • Tiffany - Board member. Assembled some pallet racks. Made a box.
  • Coy - Has been working on cleaning up the space.
  • Ryan - Visting the space.
  • Mike - Still new to the space and acquiring projects.
  • Will - Has been staying vertical.
  • Ken - battling kidney stones.
  • Mathew Robins - Recurring visiter. Currently refurbishing a 1920.s sewing machine. Interested in RPi and Arduino Classes.
  • Tom Meyer - working on trinkets and relaxing over the holiday
  • Imon? - New visitor.
  • Kelly - Recent graduate. Visiting the space. Interested in sculpture work.
  • Ryan - Software engineer by day. Visiting the space. Built an electric go kart.
  • Andy - Third visitation. Working on canbus.
  • Callie - third weekly meeting. Hoping to apply. Interested in raspberry pi class.
  • Micah - New visitor. Networking guy. Builds PCs.
  • Mary - Repeat visitor. Eating chocolate.
  • Nancy - Added a trailer hitch to her van.
  • Steve - Has been playing with Arduinoberry Pis. Working on a security system for the house.
  • Brad - Working projects at home. Learned not to play video games with a 15 year old.
  • John - Interested in Lorin’s PCB class.
  • Dave B - Finished the fume extractor hood for the electronics bench. Leaving a small 3d printer on long term loan.
  • Elly - Hand sewing sequins. Learning to play the ukulele