|Start Date: 2/8/2013|
|End Date: 2/21/2013|
Uses dry film photolithography. See here for more info.
Bill was kind enough to print all the 3D printable parts on the Gigabot on 2/8/14.
Roll of photopolymer film recommended for this method ordered 2/9/14 by Dave.
29cm x 21cm solar film sheet ordered 2/9/14 by Dave
PCBs for electronics ordered from Osh Park 2/9/14 by Dave
4 pack of Laser Diodes ordered 2/9/14 by Dave
TO DO List
Printer Base 384mm x 351mm 8mm plywood (have it @hive / buy it @ homedepot)
Top Plate 327mm x 269mm 8mm plywood (have it @hive / buy it @homedepot) with laser cutting required
Matte black spraypaint (have it @hive / homedepot)
Piece of glass, 232mm x 191mm x 1.6mm (home depot)
Cardboard sheet 210mm x 170mm x 5mm (@hive13 / around)
Sodium Carbonate and Sodium Hydroxide required. I think I have some of both. I will check. If not, easy enough to order.
PCB Etchant required.
Mechanical parts - HELP!