Delta 14" Bandsaw: Difference between revisions

Jump to navigation Jump to search
77 bytes removed ,  05:45, 21 April 2021
no edit summary
No edit summary
Line 38: Line 38:
Because we have lots of members who use the bandsaw for quick walk-up cuts, please make sure the 1/4" blade is the one that stays on the saw.  If you need to use another blade to do fine scroll work or resaw, CHANGE IT BACK WHEN DONE.  the 1/4" x 6 TPI blades we have are good general purpose blades for 90% of what our bandsaw gets used for at Hive13.  Thus, It should be the one to stay on the saw.
Because we have lots of members who use the bandsaw for quick walk-up cuts, please make sure the 1/4" blade is the one that stays on the saw.  If you need to use another blade to do fine scroll work or resaw, CHANGE IT BACK WHEN DONE.  the 1/4" x 6 TPI blades we have are good general purpose blades for 90% of what our bandsaw gets used for at Hive13.  Thus, It should be the one to stay on the saw.


It is every member's responsibility to make sure the bandsaw is adjusted before using it, even if you are not the one who changed the blade.  If anyone needs an in-person demo to make sure you have the process down, please don't hesitate to ask for help. I have warden hours tomorrow evening or can meet you whenever is convenient.
It is every member's responsibility to make sure the bandsaw is adjusted before using it, even if you are not the one who changed the blade.  If anyone needs an in-person demo to make sure you have the process down, please don't hesitate to ask for help.


== General Information ==
== General Information ==
2,201

edits

Navigation menu