Smith Little Torch: Difference between revisions

Jump to navigation Jump to search
no edit summary
No edit summary
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Glassworking}}
{{Glassworking}}
{{Jewelry Making}}
{{Jewelry & Metalsmithing}}


{{Equipment
{{Equipment
|owner=Hive13
|owner=Hive13
|consumables=no
|assetTag=HV0248
|assetTag=HV0248
|model=Smith Little Torch
|model=Smith Little Torch
Line 11: Line 12:
|certification=yes
|certification=yes
|contact=Kevin M
|contact=Kevin M
|where=Glassworking
|where=Hot Crafts Area
|subcat=Glassworking
|subcat=Glassworking
|subcat=Jewelry Making
}}
}}


Line 59: Line 59:


==== If using the [[Carlisle CC Torch]] ====
==== If using the [[Carlisle CC Torch]] ====
# Turn off the [[Smith little Torch]] by turning the torch oxygen valve off, then turning the torch propane valve off.
# Turn off the [[Smith Little Torch]] by turning the torch oxygen valve off, then turning the torch propane valve off.
# Follow the instructions on the [[Carlisle CC Torch]] page to shut down and depressurize the gas system.
# Follow the instructions on the [[Carlisle CC Torch]] page to shut down and depressurize the gas system.


Line 65: Line 65:
# Check that all four valves on the [[Carlisle CC Torch]] are shut (clockwise to shut, Red is propane, Green is oxygen) AND That both valves  on the [[Smith Little Torch]] are shut (clockwise to shut, Red is propane, Green is oxygen).
# Check that all four valves on the [[Carlisle CC Torch]] are shut (clockwise to shut, Red is propane, Green is oxygen) AND That both valves  on the [[Smith Little Torch]] are shut (clockwise to shut, Red is propane, Green is oxygen).
# Ensure the Griffin Glass Torch Foot Pedal in the ON position.
# Ensure the Griffin Glass Torch Foot Pedal in the ON position.
# Turn off the [[Smith little Torch]] by turning the torch oxygen valve off, then turning the torch propane valve off.
# Turn off the [[Smith Little Torch]] by turning the torch oxygen valve off, then turning the torch propane valve off.
# If you plan to keep working, you may leave the gas bottles open and the lines pressurized to relight the torch without re-adjusting the gas system.  However, if you plan to stop for more than 15 minutes, please  continue the following steps and depressurize the gas lines.
# If you plan to keep working, you may leave the gas bottles open and the lines pressurized to relight the torch without re-adjusting the gas system.  However, if you plan to stop for more than 15 minutes, please  continue the following steps and depressurize the gas lines.
# Ensure the vent hood is ON during gas burnout.
# Ensure the vent hood is ON during gas burnout.
2,198

edits

Navigation menu