From Hive13 Wiki
(Redirected from Wish list)
Jump to navigation Jump to search

This is stuff we would like to have in our space. If you want to donate a tool see Donations. Monetary contributions however big or small are also very welcome! If you want to donate towards a tool/want to start a fundraiser for one please contact our COO. Note that un-reimbursed expenses spent on behalf of Hive13 and its non-profit mission should be tax-deductible. If you spend more than $250 on an item you may need a letter from the Hive (details needed)

Hot Crafts Area

Jewelry & Metalsmithing

  • Soldering torch at bench
  • dust collection/ventilation
  • Under-bench pull-out trays as catch pans
  • proper jewelry bench
  • Wax injector
  • Electric Furnace

Stained Glass

  • T-Square w/ 1/4" bead for strip cutting
  • hole/circle cutter
  • Ring Saw


  • Taller kiln
  • Oxygen Concentrator/compressor setup (to eliminate the need to buy oxygen)
  • Miniature Furnace and glory hole


  • clay filter/trap/rinse area (not attached to sink)
  • Schedule system
  • extruder

General Use and Other Equipment

  • Air hose for cleaning/drying work and to run a wax injector

3D Printing Area

  • Webpage showing 3D Printer statuses
    • camera ongoing prints
    • maybe just octoprint?
  • Ender3v2 enclosure
  • Prusa XL (might be unrealistic, but I want it here, okay?!)


  • 24 complete matching place settings
  • Sous-Vide
  • Instapot
  • Better toaster oven with convection
  • Improved Blender/Food processor
  • Rocks glasses
  • Anti-fatigue mats
  • Baking spatulas
  • New pot holders / oven mitts (This would make a great sewing class collaboration!)
  • Metal spatulas (Various sizes, slotted/solid, etc)
  • Pasta spoon
  • Soup sized bowl set
  • Under sink organizer
  • Tupperware set
  • Large drying mat
  • Mortar and Pestle
  • Better spice storage
  • Soup/Cereal sized bowl set
  • Candy dispenser (may work for kitchen or lounge?)
  • Spoon rest



  • Nice way to store components.
  • Assorted electronic components (Pots, diodes, you name it)
  • Crimp on wire connectors

Electronic Tools

  • Good Fume Extraction
    • Filtered system with decent airflow. DIY or otherwise.
  • Laser Thermometer
  • rubidium/other atomic frequency standard


  • Keithley 7510
  • Keithley 2460
  • Agilent/Keysight DSOX4024A
  • Agilent/Keysight signal gen
  • Pick and place machine - Possible add-on to a Delta Printer/Robot

CNC Router

CPU Enclosure

  • Build enclosure for CNC Control and PC
  • Support the keyboard, mouse and monitor.
  • Provide storage for collets and bits
  • Include cooling fans and air filters
  • Mount on casters

Wood Working


  • SHAPEOKO workspace, enclosure for dust control. (does this belong with woodworking exhaust?)
  • Separate Wood working tools from metal working tools.
  • Store wood working blades and accessories at the machine, in appropriate storage cabinet.
  • Powermatic planer
    • Model no 1791213
  • Nicer circular saw
  • Router Table with work area
  • Work bench with level feeds for Saws
  • Feed support and feed space for Joiner, Planer, Router
    • More F clamps
      • Jorgensen 37xx series
    • Parallel clamps
      • jorgensen 80xx series
  • Saw horses. Preferably fold-able.
  • Magnetic feather boards
  • Knife maker's sander
  • Board Buddies (or the like)
  • Wide selection of hand planes
  • Chisel sharpening tools
  • GRR-Ripper push block
  • Splitter w/o blade guard
  • Panel Saw
  • Mortiser


  • Move Vertical Storage to improve working space and access to materials
  • Air cleaners to catch all of the small dust from sanding, bandsaw, etc that goes in the air. (we have one, but better mounting would be good and more would also be good)
  • Storage Space for Projects Underway.

Metal Working

  • Water-Jet cutting (dream on)
  • Cutting:
    • Vertical bandsaw. Sometimes you need to do more sophisticated things than cut stuff in half...
    • Blade Welder for Band Saw(s) Buy bulk blades and weld them on demand. (much lower cost)

Milling Machine,Tools/Fixtures

  • R8 collets larger than 3/4 inch (complete our set)
  • V blocks
  • Offset boring head & boring bars
  • Sine bar
  • Gauge block set - Cylindrical square
  • Rotary table 6 to 10 inch - Indexing / dividing head
  • Nice screw length drill bit set
  • Cover for Lathe and Mill to keep off sawdust

Sheet Metal Tools

  • Metal Box / Pan Brake - Moveable Fingers 12 Ga capable Manual $2500 to $3500
  • Metal Shear, Manual Stomp 12 Ga capable $2000 to $5000
  • Spot welder

Welding Accessories

Misc Tools

  • Tubing Bender / roller with Dies
  • Tube Notching Jig and Metal Cutting Hole Saws for up to 2 inch tubing
  • Maybe:
    • Pressure washer


  • Better ventilation for welding

Sewing and Craft Area


  • Large cutting table
  • Male dress form
  • Upholstery - including staple gun
  • Pattern drafting software

Please check with the Sewing Warden before donating sewing supplies as there is a limited amount of space

Craft Area

  • Work table along window wall of front space with spinning stools
  • Paint brushes both bristle and foam
  • Resin Casting Workspace - Vacuum Pot, Level Table, Exhaust Fan - (potentially in paint area?)
  • Digital drawing pad (USB input device, vs tablet-style?)

Other Work Areas

CAD Stations


  • 4-color Screen-printing rig
  • Lift
  • fume hood
  • autoclave
  • large digital scale (200lbs+, maybe .1lbs resolution?)
  • temperature controlled hot plate (digital or analog fine)
  • Large trash cans to spread around the new larger space


  • Build Filter HEPA housing and positive airflow fans for Server Rack Either install on back of Rack or build separate housing.
  • We are always looking to upgrade our computers! Specs we are looking for:
    • i3 or better
    • 4 GB+ of RAM
  • Hard drives larger than 1 TB or SSDs bigger than 128GB
  • Leap gesture controller (very cool but not very useful)


  • Desk to store the "official" paperwork. Maybe an old rolltop?


  • Swinging pegboard storage for workbench area
  • More Large Flat storage


  • Decent Media PC
  • Chromecast/Miracast?

General Space Wants and Needs



  • Posters
  • Plants would be nice to keep the air a bit cleaner and liven up the space a bit